Light Pole Seam Welder-Shut Welding Machine Suitable For Max 340mm
Diameter,16000mm length pole
|Name||Other Name||Brand Name||CMC|
|Light pole shut-welding machine|
Close welding machine
Pole welding machine
Tube welding machine
|Feature||Specially designed for circle and polygon pole/tube|
Length: max 16 meters
APPLICATION: FOR AUTOMETIC WELDING LIGHT POLE MAX LENGTH 16000MM.
LIGHT POLE SHUT-WELDING MACHINE MODEL: 340/16000, it is suitable
for one piece type polygonal and circle taper light pole. it is
automatic welding line, the dolly with speed adjustable motor can
pull the light pole from small end to big end, The hydraulic
cylinder through mechanical chain, worm wheel push the clamping
wheel to close the pole and do welding at same time.
1. Long working table with rack for pull dolly.
2. Dolly for pulling pole.
3. Hydraulic clamping and welding unit (including 3 sets clamping
wheels for polygonal and circle pole).
4. Submerged Arc Welding and Gas-shielded welding (CO2) Welding
system, including welding wire feeding system.
5. The flux recovering system.
6. Back support unit.
Suitable light pole Thickness base on mild steel Q235
|Light pole diameter: 60~340mm||2.8~3mm|
|Light pole diameter:70~340mm||2.8~4mm|
|Light pole diameter: 250~340mm||2.8~6mm|
Power of Motor for Pump
Power of Motor for pulling dolly
4 KW, AC speed changeable type.
630A, (Submerged Arc Welding and Gas-shielded welding(CO2) Welding
Welding wire diameter
1.2,1.6~2mm welding wire, according the pole thickness to do
|9||Working Speed||1.1~2m/min (Note: different thickness speed will be different|
|10||Gross weight||7000 kg|
Overall sizes (mm)
16meter table + 7 meter’s back support also included
OPTION:( detail see attached photos)
- Lincoln welding machine (USA BRAND)
Note:, If chose the Lincoln welding machine,normally it is suitable
for Submerged Arc Welding process
- Fast motorized return back for dolly
Note:for the standard machine, the dolly return back can be
motorized with working speed, it is very slow for return back
process. So, normally, the operator will open the dolly clutch and
push the dolly by manual.
In order to reduce the manpower, we have option: Fast motorized
return back for dolly. The operator only push button, the dolly
will be back to the welding head.
See attached detail photos.
- Both Side additional hydraulic cylinder
It is suitable for small diameter big thickness light pole, or
steel plate with high tensile strength light pole.
With this additional option, the diameter from 60~340mm, thickness
2.8~6mm, all pole can be suitable. And easy for operation.